Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
08-08-2012, 12:57 PM,
1100 plug tool?
Hey all, new here with I guess maybe newbie questions since I just got this bike a few weeks ago. It is an 08 1100. What do you use to get the plug in. The plug tool that came with the bike doesn't fit. Too much "frame' around it and it gets in the way. Does anyone have any suggestions. Thanks
08-08-2012, 06:55 PM,
Re: 1100 plug tool?
Hey welcome. That tool should fit in. I have the same bike. Slide the tool slowly at an angle and let it go in. Then move and twist with your fingers so can set/lock on the plug. Also see the manual. It tells in detail.
08-08-2012, 10:29 PM,
RE: 1100 plug tool?
Thanks Zag. I'll take your suggestion when I get some time in the next day or so when I have some spare time.
08-11-2012, 03:04 PM,
RE: 1100 plug tool?
Like Zag says, you shouldn't have any issues. I have used the tool out of my kid and it has fit fine. You might want to try using a wrench end on it instead of a ratchet if that works.
08-12-2012, 09:23 PM,
RE: 1100 plug tool?
You could always trying using a long extension with a 3/8" drive ratchet and a regular spark plug socket.

That should clear the tank.
08-14-2012, 11:38 AM,
RE: 1100 plug tool?
Mine works fine but I had issues when I first started. I use a 3/8" drive ratchet and an extension exactly like LondonFlyer says.
08-14-2012, 01:50 PM,
RE: 1100 plug tool?
Got it working, thanks all! Just a little tricky the first time or so and had to move the engine guards. Thanks!
08-14-2012, 02:10 PM,
RE: 1100 plug tool?
I actually use sparkplug socket swivel adapter and use a 6" extension.
08-27-2012, 12:52 PM,
RE: 1100 plug tool?
Okay z3oiroc thanks. I might use that trick next time.
Possibly Related Threads...
Thread Author Replies Views Last Post
  AIS plug ET_Geckoe 15 11,474 02-15-2014, 07:00 PM
Last Post: Keith

Users browsing this thread:
1 Guest(s)